Skip to content

Airspeed sensor DLVR-L10D - M10090 hwrev

img

The DLVR airspeed sensor is equipped with an All Sensors DLVR-L10D sensor that has a ±10 inH2O measurement range. This mini digital output pressure sensor is based on All Sensors' CoBeam2 TM Technology. This reduces package stress susceptibility, resulting in improved overall long term stability. The technology also vastly improves position sensitivity compared to single die devices.

The sensor includes a pitot tube, flexible tubing, and a 4-pin JST-GH wire.

Specification Value
Dimensions 17.8 mm x 19.3 mm
Weight 3g (no tubing), pitot tube is 3.12g
Sensor MPN DLVR-L10D-E1BD-I-NI3N
Operating voltage 4.6 - 5.5 V
Temperature range (operational) -20 to 85 C [^1]
Temperature range (storage) -40 to 125 C
Measurement range ±10 inH2O [^2]
Total error band ±0.06 inH2O
Firmware AP_Periph: f103-Airspeed

img

Setup

Ardupilot

Set the following parameters: - ARSPD_TYPE=8(UAVCAN) - ARSPD_USE=1

PX4

Set UAVCAN_SUB_DPRES parameter to 1, then reboot.

Downloadables

STEP file

[^1]: Commercial range PN is pictured, but we ship the industrial temperature range part. [^2]: Other ranges available upon request.